Tuesday, November 20, 2012


Fancy Colored Diamonds

Fancy colored diamonds come in many different colors; the mostly known colors are blue, pink, orange, yellow, and red.
       
BLUE diamonds are found in all intensities; most blue diamonds are very rare; they have been around for quite a while.

PINK diamonds are some of the rarest and most highly valued color diamonds in the market today.

ORANGE diamonds are very rare - you don’t see them often.

YELLOW diamonds are very, very rare; they are not commonly found.

RED diamonds are the rarest colored diamond. 


Due to the rarity of fancy colored diamonds it’s important to insist on buying only a certified fancy colored diamond from trusted and registered dealers.

Price
Mined blue diamonds are quite rare and can sell between $200,000 and $500,000 for one carat. Pink diamonds can easily cost over $100,000 for one carat. Orange diamonds are about $30,000- $40,000. Yellow diamonds can be about $6,000- $8,000. Red colored diamonds are about $13,500 at its lowest, it could be up to 18,000 for just one carat.

Where do colored diamonds come from?
Blue diamonds originally came from India; many blue diamonds now come from South Africa. Pink diamonds come from Australia. Orange diamonds come from the Argyle mine in Australia and South Africa. Yellow diamonds are found mostly in South Africa. Red diamonds have been known to come from Australia, and a few from South Africa and Brazil.  

                                                                                                                                                            


Carrie Underwood’s engagement ring is over
5 carats and is valued for about $150,000



                                                           

Jennifer Lopez’s engagement ring- over $4 M and is about 6 carats

Monday, August 27, 2012

The Diamond: From Nature to Polished


The making of a diamond is a multi-step process which begins with its unearthing. An unearthed diamond has none of the luster and brilliance of a fully polished and well-cut one. Its radiance and fire comes from its clarity and light distribution, which will be unlocked through the process of cutting.



Rough Diamonds



            There are five steps that separate a rough diamond from the centerpiece of a ring, the first step is called marking. This is when the expert surveys the stone and determines where it can best be cut to ensure beauty while losing the least weight possible. The surveyor will mark the stone with India ink to determine the place where it will be cut.


The marker is showing where the diamond will be cut



Once the stone has been marked, the second process is to begin, cleaving. Cleaving is the actual process of cutting the diamond. The stone is placed in a holder called a “dop” and secured with cement. Then, a groove is worked through all the marked places on the stone using another diamond (because diamonds are the only thing strong enough to cut a diamond). Then, a knife is placed inside the groove and hit with a mallet. This skill takes years to master and can potentially ruin, or even shatter the diamond.


The diamond cutter in action


Once cleaving has been finished the diamond moves to the next stage of its shaping, sawing. Sawing rids the diamond of its imperfections and is the final step in determining the shape of diamond it was destined to become (round, oval, etc.).  The saw is made of phosphor bronze, it is coated in diamond powder and oil, and its speeds are approximately 15,000 rounds per minute. Instead of further cutting the diamond, sawing will leave the maximum percentage of the stone in tact.


The saw is removing the imperfections so the diamond’s fire can show without taking any unnecessary weight away.




 Once sawing is completed, the next step, called bruiting, can begin. This step is focused on the girdle of the diamond. The girdle is the part formed around the thickest part. This band will be rounded during this stage by a lathe, a high-powered spinner that will be done until the girdle is perfectly round at its girdle.





The diamond’s girdle is being rounded to show its smooth finish



 After bruiting comes the last stage of making a polished diamond, blocking. This part of the process is where the diamond will acquire its facets. To do this, the stone is lowered on to an iron disc known as a scaife. The professional individually works each facet; brilliant cut diamonds typically contain 58 facets. After this process is completed, a diamond is ready to be placed in a piece of jewelry where its fire and brilliance can be shown.



Different diamond varieties have a diverse number of facets

Tuesday, August 14, 2012

Our story...


Until now, UniqueStones has been a more private wholesaling company. I had been doing business with my customers on a more private scale; I had focused more on the details of the jewelry than the understanding of what that one piece of jewelry meant. However, I began to understand the impact that my jewelry can have when my eldest daughter got engaged. I worked with her fiancĂ© on making the perfect ring for her, as I had done with many customers in the past, and then I was able to watch as their story played out. Seeing how the happiness and love of two people can turn into a lifetime commitment; and seeing my daughter’s overwhelming happiness with the engagement ring that she received, not only because of its radiant beauty but also because of its significance was very rewarding. Therefore, I have decided to bring UniqueStones to the public where I can focus more on the unique story behind each one of the stones in every piece of our jewelry. 
  


-January 2, 2012: Arielle & Oren's Engagement

Tuesday, August 7, 2012


Education Is Key to Buying Diamonds

This is your guide for how to purchase high quality diamonds. Understanding the 4 C's - cut, clarity, color and carat of a diamond are essential to getting the best diamond quality for an affordable price.
  1. Cut: The cut of a diamond determines its brilliance. Put simply, the better a diamond is cut, the more sparkle it will have. The cut of a diamond has the greatest influence on the image of the diamond. A well-cut diamond will appear very brilliant and fiery, while more poorly cut stones can appear dark and lifeless, regardless of color or clarity. Not only do well-cut diamonds appear more brilliant, they can also appear larger than other stones of the same carat weight. A well cut stone has both increased brilliance as well as increased diameter.
    Round Cut Diamond
    Clearly, the cut of the diamond determines its shape, there are several important shapes that diamonds will be classified in.
    RoundThis is the most popular cut. It is the most common in earrings, necklaces, and, of course, engagement rings. There are fifty-eight facets in a Round Brilliant Cut. Of course, Round cuts are the most expensive of the diamond cuts. It is very possible to keep more weight from an unpolished diamond if it is cut into a shape other than a Round.
    Round Shaped Diamond
    Princess: Princess cut diamond is usually more square-shaped than rectangular. It is one of the most popular cuts used in diamond jewelry, especially for engagement rings. In GIA grading reports, a princess cut diamond is called a rectangular modified brilliant, or a square brilliant. It can have fifty facets, or fifty-eight facets.
    Princess Shaped Diamond
    Emerald: The Emerald cut diamond commonly has fifty-eight facets; it is usually referred to as a step cut because it has rows of facets. An Emerald cut diamond has a subtle, understated, and classic look; it is less flashy than brilliant cut diamonds. Rectangular shaped is the most popular shape of an Emerald cut. A higher color and clarity is recommended when purchasing an Emerald cut diamond, because they are more likely to become more noticeable at a lower grade.
    Emerald Shaped Diamond
    Asscher: Similar to an emerald cut, an Asscher cut is also referred to as a step cut; the Asscher cut is more of a square with deeply cut corners, making the final shape more of an octagon. A smaller table, a larger step facet, deeper pavilion, and a higher crown than an Emerald cut characterize the Asscher cut. Because of these characteristics, the Asscher cut has more fire and light than the Emerald cut. We recommend that any Asscher stone have at least VS2 clarity and H color.
    Asscher Shaped Diamond
    HeartA brilliant cut diamond, usually contains fifty-nine facets. Many Heart cut stones are purchased as single diamonds for necklaces in half-carat sizes or more. They are popular as matched pairs for stud earrings, or side-accent stones for diamond rings or earrings. When purchasing heart-shaped stones together, it is very important to look for perfectly symmetrical stones. The top arches should be of even height and breadth. The heart shape should be neither too flat, nor overly deep. To keep a good balance between the brilliance of the diamond and the bigger/smaller look of the stone. A heart-shaped stone should have at least I color and SI2 clarity.
    Heart Shaped Diamond
    CushionPreviously known as the Old Mine Cut, developed in the late 1800s, a Cushion cut can be square, to rectangular, to everything in between. Cushion cuts have fifty-eight brilliant-style facets and rounded corner. A classic Cushion cut got its cut from its pillow-like shape, which tends to have a ratio in the 1.1-1.2 range. The ratio generally depends on the customer’s personal preference. A modified cushion often has the exceptional sparkle look of a well-cut Radiant cut diamond. A Cushion cut should have at least I color and SI2 clarity with a length-to-width-ratio of 1.1-1.2. If you are looking for a fancy color diamond, the cushion cut is a good choice, because it displays the color evenly throughout the stone.
    Cushion Shaped Diamond
    MarquiseA Marquise is an elongated, fancy-shaped diamond, pointed on both ends. The Marquise has a very large surface area for its carat weight, so if you’re looking for a big look at a cost-effective price, this is an excellent choice. The Marquise diamond should have at lease I color and SI2 clarity.
    Marquise Shaped Diamond
    OvalKnown technically as the "oval modified brilliant", the oval is most frequently cut in a standard fifty-eight facet brilliant pattern, but can vary with a number of pavilion main facets, having four, six, or eight. Oval prices are relatively high because they are very much sought after. They are popular for center stones in engagement rings and also three-stone rings which are popularly used as anniversary gifts. Oval shapes must have even, well-rounded ends with an optimal length-to-width-ratio of 1.33-1.35. Oval-shaped diamonds contain a bigger surface area than round diamonds with the same carat weight, which make them a good choice for purchasers looking for the same brilliance as a round diamond, and a bigger look, for the price. Oval diamonds should have at least I color and SI1 clarity.
    Oval Shaped Diamond
    PearTechnically, the pear is referred to as the "pear-shaped modified brilliant" because it is a modified version of the traditional round brilliant. It is a blend of the round and marquise brilliant cuts and generally has the 58 facet brilliant pattern, but can be cut with various numbers of pavilion mains of 8, 7, 6, or 4 facets. The teardrop shape encompasses a round or oval shape on half the facet pattern while the other half resembles a marquise. Pear shaped diamonds are used for engagement rings, layouts for pendants for necklaces, dangles in earrings, and integral parts of custom designs. We commonly seek pear shaped diamonds with a depth 57-65.4% and table 52-64%. We recommend at least I color and SI1 clarity for pear shaped diamonds.
    Pear Shaped Diamond
    RadiantThe radiant cut is the rectangular or square modified brilliant. While some radiant cut diamonds have 70 facets, the most common facet pattern has 62 facets. The trimmed corners help to minimize chipping. The radiant cut diamond is the first rectangular cut to have a complete brilliant facet pattern applied to both the crown and pavilion. This presents a more shiny and brilliant diamond than the simple emerald cut. We recommend radiant cut diamonds with depth 58-69% and table 58-69%. We advise at least I color and SI1 clarity for radiant cut diamonds. Radiant cuts are especially popular for fancy colored diamonds because shape, proportioning and facet arrangement strengthen the color.
    Radiant Shaped Diamond
    TrillionThe trillion cut diamond was originally used as side stones to a larger diamond on engagement rings, but now it is commonly used as a center stone. The trillion shape is a brilliant cut, meaning that it catches light well, projecting its sparkly image. The exact design of trillion cut diamonds depends on two things: the skill and preference of the cutter, and the natural features of the stone. The diamond can be a triangle with pointed corners, or more rounded, with 25 facets on the crown, and 19 facets on the pavilion. The crown is the upper part of the diamond above the girdle. The girdle is the narrow rim around the diamond.
    Trillion Shaped Diamond
  2. Clarity: Clarity is a measure of the tiny imperfections that appear in all diamonds. Clarity simply refers to the minute, natural imperfections that occur in most diamonds. Gemologists refer to these imperfections by a variety of technical names, including blemishes and inclusions.
    Diamond Grading
    Diamond Clarity
    FL, IFFlawless, Internally Flawless: No internal or external imperfections. Internally Flawless: No internal imperfections. Very rare.
    VVS1, VVS2Very, Very Slightly Included: Very difficult to see imperfections under 10x magnification. An excellent quality diamond.
    VS1, VS2Very Slightly Included: Imperfections are not typically visible to the unaided eye. 
    SI1, SI2Slightly Included: Imperfections are visible under 10x magnification, and may be visible with the unaided eye. A good diamond value. 
    SI3, I1This grade of diamonds will have minor inclusions that may be visible to the unaided eye. 
    I2, I3Imperfections visible to the naked eye.
  3. Color: Color refers to how white the diamond appears to be. A diamond’s color grade is based on its lack of color. D is the highest color grade possible, and Z is the lowest. Color projects itself in a diamond as a whitish yellow. The less color a diamond has, the higher its color grade will be. Color is considered the second most important feature to a diamond because the human eye is drawn to sense a diamonds sparkle and color at first glance.
    D - Absolutely colorless. The highest color grade. Extremely rare.
    F-E - Colorless. Very little traces of color can be found.
    H-G - Near-colorless. Color difficult to detect unless compared side-by-side against diamonds of better grades.
    I-K - Near colorless. 
    Z-N - Noticeable color.
  4. CaratContrary to popular belief, carats do not only represent the size In describing diamond weight, you often hear the term points used. For example, you might hear that a diamond is 84 points. This has the same meaning as .84 carats, because there are 100 points to a carat. Thus, .50 carats would be the same as 1/2 carat or 50 points, 1.50 carats would be the same as 1 carat and 50 points or one and one half carats. In making your purchasing decision, it is important to realize that a 2 carat diamond will not look double the size of a 1 carat diamond. Because a diamond is three dimensional, the carat weight is dependent on both the diameter and depth.
    Diamond Size Chart